Oracle

Interview Questions

Oracle Interview Questions and Answers : SQL

1.      To see current user name
 Sql> show user;

2.      Change SQL prompt name
 SQL> set sqlprompt “Manimara > “

3.      Switch to DOS prompt
 SQL> host

4.      How do I eliminate the duplicate rows ?
 SQL> delete from table_name where rowid not in (select max(rowid) from table group by duplicate_values_field_name);
or
SQL> delete duplicate_values_field_name dv from table_name ta where rowid< (select min(rowid)  from table_name tb where ta.dv=tb.dv);
Example.
Table Emp
Empno Ename
101               Scott
102               Jiyo
103               Millor
104               Jiyo
105               Smith
delete ename from emp a where rowid < ( select min(rowid) from emp b where a.ename = b.ename);
The output like,
Empno Ename
101               Scott
102               Millor
103               Jiyo
104               Smith

5.      How do I display row number with records?
To achive this use rownum pseudocolumn with query, like SQL> select rownum, ename from emp;
Output:
1                    Scott
2                    Millor
3                    Jiyo
4                    Smith

6.      Display the records between two range
select rownum, empno, ename  from emp  where  rowid in
 (select rowid from emp where rownum <=&upto
 minus
 select rowid from emp where rownum<&Start);
Enter value for upto: 10
Enter value for Start: 7

   ROWNUM     EMPNO ENAME
--------- --------- ----------
        1      7782 CLARK
        2      7788 SCOTT
        3      7839 KING
        4      7844 TURNER

7.      I know the nvl function only allows the same data type (i.e. number or char or date Nvl(comm, 0)), if commission is null then the text “Not Applicable”  want to display, instead of blank space. How do I write the query?

 SQL> select nvl(to_char(comm.),'NA') from emp;

Output :

NVL(TO_CHAR(COMM),'NA')
-----------------------
NA
300
500
NA
1400
NA
NA

8.      Oracle cursor : Implicit & Explicit cursors
Oracle uses work areas called private SQL areas to create SQL statements.
PL/SQL construct to identify each and every work are used, is called as Cursor.
For SQL queries returning a single row, PL/SQL declares all implicit cursors.
For queries that returning more than one row, the cursor needs to be explicitly declared.

9.      Explicit Cursor attributes
 There are four cursor attributes used in Oracle
cursor_name%Found, cursor_name%NOTFOUND, cursor_name%ROWCOUNT, cursor_name%ISOPEN

10.  Implicit Cursor attributes
 Same as explicit cursor but prefixed by the word SQL

SQL%Found, SQL%NOTFOUND, SQL%ROWCOUNT, SQL%ISOPEN

Tips : 1. Here SQL%ISOPEN is false, because oracle automatically closed the implicit cursor after executing SQL statements.
       : 2.  All are  Boolean attributes.

11.  Find out nth highest salary from emp table
 SELECT DISTINCT (a.sal) FROM EMP A WHERE &N = (SELECT COUNT (DISTINCT (b.sal)) FROM EMP B WHERE a.sal<=b.sal);

Enter value for n: 2
      SAL
---------
     3700

12.  To view installed Oracle version information
 SQL> select banner from v$version;

13.  Display the number value in Words
 SQL> select sal, (to_char(to_date(sal,'j'), 'jsp'))
from emp;
the output like,

      SAL (TO_CHAR(TO_DATE(SAL,'J'),'JSP'))
--------- -----------------------------------------------------
      800 eight hundred
     1600 one thousand six hundred
     1250 one thousand two hundred fifty
If you want to add some text like,
Rs. Three Thousand only.
SQL> select sal  "Salary ",
 (' Rs. '|| (to_char(to_date(sal,'j'), 'Jsp'))|| ' only.'))
 "Sal in Words" from emp
/
Salary  Sal in Words
------- ------------------------------------------------------
    800  Rs. Eight Hundred only.
   1600  Rs. One Thousand Six Hundred only.
   1250  Rs. One Thousand Two Hundred Fifty only.

14.  Display Odd/ Even number of records
 Odd number of records:
select * from emp where (rowid,1) in (select rowid, mod(rownum,2) from emp);
1
3
5
Even number of records:
select * from emp where (rowid,0) in (select rowid, mod(rownum,2) from emp);
2
4
6

15.  Which date function returns number value?
 months_between

16.  Any three PL/SQL Exceptions?
 Too_many_rows, No_Data_Found, Value_Error, Zero_Error, Others

17.  What are PL/SQL Cursor Exceptions?
 Cursor_Already_Open, Invalid_Cursor

18.  Other way to replace query result null value with a text
 SQL> Set NULL ‘N/A’
to reset SQL> Set NULL ‘’

19.   What are the more common pseudo-columns?
 SYSDATE, USER , UID, CURVAL, NEXTVAL, ROWID, ROWNUM

20.   What is the output of SIGN function?
 1 for positive value,
0 for Zero,
-1 for Negative value.

21.  What is the maximum number of triggers, can apply to a single table?
 12 triggers.

4.     Explain the difference between a data block, an extent and a segment.
A data block is the smallest unit of logical storage for a database object. As objects grow they take chunks of additional storage that are composed of contiguous data blocks. These groupings of contiguous data blocks are called extents. All the extents that an object takes when grouped together are considered the segment of the database object.
5.     Give two examples of how you might determine the structure of the table DEPT.
Use the describe command or use the dbms_metadata.get_ddl package.
6.     Where would you look for errors from the database engine?
In the alert log.
7.     Compare and contrast TRUNCATE and DELETE for a table.
Both the truncate and delete command have the desired outcome of getting rid of all the rows in a table. The difference between the two is that the truncate command is a DDL operation and just moves the high water mark and produces a no rollback. The delete command, on the other hand, is a DML operation, which will produce a rollback and thus take longer to complete.
8.     Give the reasoning behind using an index.
Faster access to data blocks in a table.
9.     Give the two types of tables involved in producing a star schema and the type of data they hold.
Fact tables and dimension tables. A fact table contains measurements while dimension tables will contain data that will help describe the fact tables.
10. . What type of index should you use on a fact table?
A Bitmap index.
11. Give two examples of referential integrity constraints.
A primary key and a foreign key.
12. A table is classified as a parent table and you want to drop and re-create it. How would you do this without affecting the children tables?
Disable the foreign key constraint to the parent, drop the table, re-create the table, enable the foreign key constraint.
13. Explain the difference between ARCHIVELOG mode and NOARCHIVELOG mode and the benefits and disadvantages to each.
ARCHIVELOG mode is a mode that you can put the database in for creating a backup of all transactions that have occurred in the database so that you can recover to any point in time. NOARCHIVELOG mode is basically the absence of ARCHIVELOG mode and has the disadvantage of not being able to recover to any point in time. NOARCHIVELOG mode does have the advantage of not having to write transactions to an archive log and thus increases the performance of the database slightly.
14. What command would you use to create a backup control file?
Alter database backup control file to trace.
15. Give the stages of instance startup to a usable state where normal users may access it.
STARTUP NOMOUNT - Instance startup
STARTUP MOUNT - The database is mounted
STARTUP OPEN - The database is opened
16. What column differentiates the V$ views to the GV$ views and how?
The INST_ID column which indicates the instance in a RAC environment the information came from.
17. How would you go about generating an EXPLAIN plan?
Create a plan table with utlxplan.sql.
Use the explain plan set statement_id = 'tst1' into plan_table for a SQL statement
Look at the explain plan with utlxplp.sql or utlxpls.sql
18. How would you go about increasing the buffer cache hit ratio?
Use the buffer cache advisory over a given workload and then query the v$db_cache_advice table. If a change was necessary then I would use the alter system set db_cache_size command.
19. Explain an ORA-01555
You get this error when you get a snapshot too old within rollback. It can usually be solved by increasing the undo retention or increasing the size of rollbacks. You should also look at the logic involved in the application getting the error message.
20. Explain the difference between $ORACLE_HOME and $ORACLE_BASE.
ORACLE_BASE is the root directory for oracle. ORACLE_HOME located beneath ORACLE_BASE is where the oracle products reside.
21.  How would you determine the time zone under which a database was operating?

select DBTIMEZONE from dual;

22.  Explain the use of setting GLOBAL_NAMES equal to TRUE.
Setting GLOBAL_NAMES dictates how you might connect to a database. This variable is either TRUE or FALSE and if it is set to TRUE it enforces database links to have the same name as the remote database to which they are linking.
23.  What command would you use to encrypt a PL/SQL application?
WRAP
24.  Explain the difference between a FUNCTION, PROCEDURE and PACKAGE.
A function and procedure are the same in that they are intended to be a collection of PL/SQL code that carries a single task. While a procedure does not have to return any values to the calling application, a function will return a single value. A package on the other hand is a collection of functions and procedures that are grouped together based on their commonality to a business function or application.
25.  Explain the use of table functions.
Table functions are designed to return a set of rows through PL/SQL logic but are intended to be used as a normal table or view in a SQL statement. They are also used to pipeline information in an ETL process.
26.  Name three advisory statistics you can collect.
Buffer Cache Advice, Segment Level Statistics, & Timed Statistics
27.  Where in the Oracle directory tree structure are audit traces placed?
In unix $ORACLE_HOME/rdbms/audit, in Windows the event viewer
28.  Explain materialized views and how they are used.
Materialized views are objects that are reduced sets of information that have been summarized, grouped, or aggregated from base tables. They are typically used in data warehouse or decision support systems.
29.  When a user process fails, what background process cleans up after it?
PMON
30.  What background process refreshes materialized views?
The Job Queue Processes.
31.  How would you determine what sessions are connected and what resources they are waiting for?
Use of V$SESSION and V$SESSION_WAIT
32.  Describe what redo logs are.
Redo logs are logical and physical structures that are designed to hold all the changes made to a database and are intended to aid in the recovery of a database.
33.  How would you force a log switch?

ALTER SYSTEM SWITCH LOGFILE;

34.  Give two methods you could use to determine what DDL changes have been made.
You could use Logminer or Streams
35.  What does coalescing a tablespace do?
Coalescing is only valid for dictionary-managed tablespaces and de-fragments space by combining neighboring free extents into large single extents.
36.  What is the difference between a TEMPORARY tablespace and a PERMANENT tablespace?
A temporary tablespace is used for temporary objects such as sort structures while permanent tablespaces are used to store those objects meant to be used as the true objects of the database.
37.  Name a tablespace automatically created when you create a database.
The SYSTEM tablespace.
38.  When creating a user, what permissions must you grant to allow them to connect to the database?
Grant the CONNECT to the user.
39.  How do you add a data file to a tablespace?

ALTER TABLESPACE <tablespace_name> ADD DATAFILE <datafile_name> SIZE <size>

40.  How do you resize a data file?

ALTER DATABASE DATAFILE <datafile_name> RESIZE <new_size>;

41.  What view would you use to look at the size of a data file?

DBA_DATA_FILES

42.  What view would you use to determine free space in a tablespace?

DBA_FREE_SPACE

43.  How would you determine who has added a row to a table?
Turn on fine grain auditing for the table.
44.  How can you rebuild an index?

ALTER INDEX <index_name> REBUILD;

45.  Explain what partitioning is and what its benefit is.
Partitioning is a method of taking large tables and indexes and splitting them into smaller, more manageable pieces.
46.  You have just compiled a PL/SQL package but got errors, how would you view the errors?

SHOW ERRORS

47.  How can you gather statistics on a table?
The ANALYZE command.
48.  How can you enable a trace for a session?
Use the DBMS_SESSION.SET_SQL_TRACE or
Use ALTER SESSION SET SQL_TRACE = TRUE;
49.  What is the difference between the SQL*Loader and IMPORT utilities?
These two Oracle utilities are used for loading data into the database. The difference is that the import utility relies on the data being produced by another Oracle utility EXPORT while the SQL*Loader utility allows data to be loaded that has been produced by other utilities from different data sources just so long as it conforms to ASCII formatted or delimited files.
50.  Name two files used for network connection to a database.
TNSNAMES.ORA and SQLNET.ORA

Oracle Concepts and Architecture Database Structures

 1. What are the components of physical database structure of Oracle database?

Oracle database is comprised of three types of files. One or more datafiles, two are more redo log files, and one or more control files.

2. What are the components of logical database structure of Oracle database?

There are tablespaces and database's schema objects.

3. What is a tablespace?

A database is divided into Logical Storage Unit called tablespaces. A tablespace is used to grouped related logical structures together.

4. What is SYSTEM tablespace and when is it created?

Every Oracle database contains a tablespace named SYSTEM, which is automatically created when the database is created. The SYSTEM tablespace always contains the data dictionary tables for the entire database.

5. Explain the relationship among database, tablespace and data file.

Each databases logically divided into one or more tablespaces one or more data files are explicitly created for each tablespace.

6. What is schema?

A schema is collection of database objects of a user.

7. What are Schema Objects?

Schema objects are the logical structures that directly refer to the database's data. Schema objects include tables, views, sequences, synonyms, indexes, clusters, database triggers, procedures, functions packages and database links.

  

8. Can objects of the same schema reside in different tablespaces?

Yes.

9. Can a tablespace hold objects from different schemes?

Yes.

10. What is Oracle table?

A table is the basic unit of data storage in an Oracle database. The tables of a database hold all of the user accessible data. Table data is stored in rows and columns.

11. What is an Oracle view?

A view is a virtual table. Every view has a query attached to it. (The query is a SELECT statement that identifies the columns and rows of the table(s) the view uses.)

12. Do a view contain data?

Views do not contain or store data.

13. Can a view based on another view?

Yes.

14. What are the advantages of views?

- Provide an additional level of table security, by restricting access to a predetermined set of rows and columns of a table.

- Hide data complexity.

- Simplify commands for the user.

- Present the data in a different perspective from that of the base table.

- Store complex queries.

15. What is an Oracle sequence?

A sequence generates a serial list of unique numbers for numerical columns of a database's tables.

16.  What is a synonym?

A synonym is an alias for a table, view, sequence or program unit.

17. What are the types of synonyms?

There are two types of synonyms private and public.

18. What is a private synonym?

Only its owner can access a private synonym.

19. What is a public synonym?

Any database user can access a public synonym.

20. What are synonyms used for?

-  Mask the real name and owner of an object.

- Provide public access to an object

- Provide location transparency for tables, views or program units of a remote database.

- Simplify the SQL statements for database users.

21. What is an Oracle index?

An index is an optional structure associated with a table to have direct access to rows, which can be created to increase the performance of data retrieval. Index can be created on one or more columns of a table.

22.  How are the index updates?

Indexes are automatically maintained and used by Oracle. Changes to table data are automatically incorporated into all relevant indexes.

23. What are clusters?

Clusters are groups of one or more tables physically stores together to share common columns and are often used together.

24. What is cluster key?

The related columns of the tables in a cluster are called the cluster key.

25. What is index cluster?

A cluster with an index on the cluster key.

26. What is hash cluster?

A row is stored in a hash cluster based on the result of applying a hash function to the row's cluster key value. All rows with the same hash key value are stores together on disk.

27. When can hash cluster used?

Hash clusters are better choice when a table is often queried with equality queries. For such queries the specified cluster key value is hashed. The resulting hash key value points directly to the area on disk that stores the specified rows.

28. What is database link?

A database link is a named object that describes a "path" from one database to another.

29. What are the types of database links?

Private database link, public database link & network database link.

30. What is private database link?

Private database link is created on behalf of a specific user. A private database link can be used only when the owner of the link specifies a global object name in a SQL statement or in the definition of the owner's views or procedures.

31. What is public database link?

Public database link is created for the special user group PUBLIC. A public database link can be used when any user in the associated database specifies a global object name in a SQL statement or object definition.

32.  What is network database link?

Network database link is created and managed by a network domain service. A network database link can be used when any user of any database in the network specifies a global object name in a SQL statement or object definition.

33. What is data block?

Oracle database's data is stored in data blocks. One data block corresponds to a specific number of bytes of physical database space on disk.

34. How to define data block size?

A data block size is specified for each Oracle database when the database is created. A database users and allocated free database space in Oracle data blocks. Block size is specified in init.ora file and cannot be changed latter.

35. What is row chaining?

In circumstances, all of the data for a row in a table may not be able to fit in the same data block. When this occurs, the data for the row is stored in a chain of data block (one or more) reserved for that segment.

36. What is an extent?

An extent is a specific number of contiguous data blocks, obtained in a single allocation and used to store a specific type of information.

37.  What is a segment?

A segment is a set of extents allocated for a certain logical structure.

38. What are the different types of segments?

Data segment, index segment, rollback segment and temporary segment.

39. What is a data segment?

Each non-clustered table has a data segment. All of the table's data is stored in the extents of its data segment. Each cluster has a data segment. The data of every table in the cluster is stored in the cluster's data segment.

40. What is an index segment?

Each index has an index segment that stores all of its data.

41. What is rollback segment?

A database contains one or more rollback segments to temporarily store "undo" information.

42. What are the uses of rollback segment?

To generate read-consistent database information during database recovery and to rollback uncommitted transactions by the users.

43. What is a temporary segment?

Temporary segments are created by Oracle when a SQL statement needs a temporary work area to complete execution. When the statement finishes execution, the temporary segment extents are released to the system for future use.

44. What is a datafile?

Every Oracle database has one or more physical data files. A database's data files contain all the database data. The data of logical database structures such as tables and indexes is physically stored in the data files allocated for a database.

45. What are the characteristics of data files?

A data file can be associated with only one database. Once created a data file can't change size. One or more data files form a logical unit of database storage called a tablespace.

46. What is a redo log?

The set of redo log files for a database is collectively known as the database redo log.

47. What is the function of redo log?

The primary function of the redo log is to record all changes made to data.

48. What is the use of redo log information?

The information in a redo log file is used only to recover the database from a system or media failure prevents database data from being written to a database's data files.

49. What does a control file contains?

- Database name

- Names and locations of a database's files and redolog files.

- Time stamp of database creation.

50. What is the use of control file?

When an instance of an Oracle database is started, its control file is used to identify the database and redo log files that must be opened for database operation to proceed. It is also used in database recovery.

  

Data Base Administration

51. What is a database instance? Explain.

A database instance (Server) is a set of memory structure and background processes that access a set of database files. The processes can be shared by all of the users.

The memory structure that is used to store the most queried data from database. This helps up to improve database performance by decreasing the amount of I/O performed against data file.

52. What is Parallel Server?

Multiple instances accessing the same database (only in multi-CPU environments)

 53. What is a schema?

The set of objects owned by user account is called the schema.

54.  What is an index? How it is implemented in Oracle database?

An index is a database structure used by the server to have direct access of a row in a table. An index is automatically created when a unique of primary key constraint clause is specified in create table command

55. What are clusters?

Group of tables physically stored together because they share common columns and are often used together is called cluster.

56. What is a cluster key?

The related columns of the tables are called the cluster key.  The cluster key is indexed using a cluster index and its value is stored only once for multiple tables in the cluster.

57. What are the basic element of base configuration of an Oracle database?

It consists of

            one or more data files.

            one or more control files.

            two or more redo log files.

The Database contains

            multiple users/schemas

     one or more rollback segments

            one or more tablespaces

            Data dictionary tables

            User objects (table,indexes,views etc.,)

The server that access the database consists of

            SGA (Database buffer, Dictionary Cache Buffers, Redo log buffers, Shared SQL pool)

            SMON (System MONito)

            PMON (Process MONitor)

            LGWR (LoG  Write)

            DBWR (Data Base Write)

            ARCH (ARCHiver)

            CKPT  (Check Point)

            RECO

            Dispatcher

            User Process with associated PGS

58. What is a deadlock? Explain.

Two processes waiting to update the rows of a table, which are locked by other processes then deadlock arises.

In a database environment this will often happen because of not issuing the proper row lock commands. Poor design of front-end application may cause this situation and the performance of server will reduce drastically.

These locks will be released automatically when a commit/rollback operation performed or any one of this processes being killed externally.

Memory Management

  

59. What is SGA?

The System Global Area in an Oracle database is the area in memory to facilitate the transfer of information between users. It holds the most recently requested structural information between users. It holds the most recently requested structural information about the database. The structure is database buffers, dictionary cache, redo log buffer and shared pool area.

60. What is a shared pool?

The data dictionary cache is stored in an area in SGA called the shared pool. This will allow sharing of parsed SQL statements among concurrent users.

61. What is mean by Program Global Area (PGA)?

It is area in memory that is used by a single Oracle user process.

62. What is a data segment?

Data segment are the physical areas within a database block in which the data associated with tables and clusters are stored.

63. What are the factors causing the reparsing of SQL statements in SGA?

Due to insufficient shared pool size.

Monitor the ratio of the reloads takes place while executing SQL statements. If the ratio is greater than 1 then increase the SHARED_POOL_SIZE.

 Database Logical& Physical Architecture

64. What is Database Buffers?

Database buffers are cache in the SGA used to hold the data blocks that are read from the data segments in the database such as tables, indexes and clusters DB_BLOCK_BUFFERS parameter in INIT.ORA decides the size.

65. What is dictionary cache?

Dictionary cache is information about the database objects stored in a data dictionary table.

66. What is meant by recursive hints?

Number of times processes repeatedly query the dictionary table is called recursive hints. It is due to the data dictionary cache is too small. By increasing the SHARED_POOL_SIZE parameter we can optimize the size of data dictionary cache.

67. What is redo log buffer?

Changes made to the records are written to the on-line redo log files. So that they can be used in roll forward operations during database recoveries. Before writing them into the redo log files, they will first brought to redo log buffers in SGA and LGWR will write into files frequently. LOG_BUFFER parameter will decide the size.

68. How will you swap objects into a different table space for an existing database?

- Export the user

- Perform import using the command imp system/manager file=export.dmp indexfile=newrite.sql. This will create all definitions into newfile.sql.

- Drop necessary objects.

- Run the script newfile.sql after altering the tablespaces.

- Import from the backup for the necessary objects.

69. List the Optional Flexible Architecture (OFA) of Oracle database?  How can we organize the tablespaces in Oracle database to have maximum performance?

SYSTEM - Data dictionary tables.

DATA  - Standard operational tables.

DATA2- Static tables used for standard operations

INDEXES - Indexes for Standard operational tables.

INDEXES1 - Indexes of static tables used for standard operations.

TOOLS - Tools table.

TOOLS1 - Indexes for tools table.

RBS - Standard Operations Rollback Segments,

RBS1,RBS2 - Additional/Special Rollback segments.

TEMP - Temporary purpose tablespace

TEMP_USER - Temporary tablespace for users.

USERS - User tablespace.

70. How will you force database to use particular rollback segment?

SET TRANSACTION USE ROLLBACK SEGMENT rbs_name.

71. What is meant by free extent?

A free extent is a collection of continuous free blocks in tablespace. When a segment is dropped its extents are reallocated and are marked as free.

72.Which parameter in Storage clause will reduce number of rows per block?

PCTFREE parameter

Row size also reduces no of rows per block.

73. What is the significance of having storage clause?

We can plan the storage for a table as how much initial extents are required, how much can be extended next, how much % should leave free for managing row updating, etc.,

74. How does Space allocation table place within a block?

Each block contains entries as follows

Fixed block header

Variable block header

Row Header, row date (multiple rows may exists)

PCTEREE (% of free space for row updating in future)

75. What is the role of PCTFREE parameter is storage clause?

This is used to reserve certain amount of space in a block for expansion of rows.

76. What is the OPTIMAL parameter?

It is used to set the optimal length of a rollback segment.

77. What is the functionality of SYSTEM table space?

To manage the database level transactions such as modifications of the data dictionary table that record information about the free space usage.

78. How will you create multiple rollback segments in a database?

- Create a database, which implicitly creates a SYSTEM rollback segment in a SYSTEM tablespace.

- Create a second rollback segment name R0 in the SYSTEM tablespace.

- Make new rollback segment available (after shutdown, modify init.ora file and start database)

- Create other tablespaces (RBS) for rollback segments.

- Deactivate rollback segment R0 and activate the newly created rollback segments.

79. How the space utilization takes place within rollback segments?

It will try to fit the transaction in a cyclic fashion to all existing extents. Once it found an extent is in use then it forced to acquire a new extent (number of extents is based on the optimal size)

80. Why query fails sometimes?

Rollback segment dynamically extent to handle larger transactions entry loads.

A single transaction may wipeout all available free space in the rollback segment tablespace. This prevents other user using rollback segments.

81. How will you monitor the space allocation?

By querying DBA_SEGMENT table/view

82. How will you monitor rollback segment status?

Querying the DBA_ROLLBACK_SEGS view

IN USE                            - Rollback Segment is on-line.

AVAILABLE                      - Rollback Segment available but not on-line.

OFF-LINE                        - Rollback Segment off-line

INVALID                           - Rollback Segment Dropped.

NEEDS RECOVERY      - Contains data but need recovery or corrupted.

PARTLY AVAILABLE  - Contains data from an unresolved transaction involving a

                                           distributed database.

83. List the sequence of events when a large transaction that exceeds beyond its optimal value when an entry wraps and causes the rollback segment to expand into another extend.

Transaction Begins.

An entry is made in the RES header for new transactions entry

Transaction acquires blocks in an extent of RBS

The entry attempts to wrap into second extent. None is available, so that the RBS must extent.

The RBS checks to see if it is part of its OPTIMAL size.

RBS chooses its oldest inactive segment.

Oldest inactive segment is eliminated.

RBS extents

The data dictionary tables for space management are updated.

Transaction Completes.

84. How can we plan storage for very large tables?

Limit the number of extents in the table

Separate table from its indexes.

Allocate sufficient temporary storage.

85. How will you estimate the space required by a non-clustered tables?

Calculate the total header size

Calculate the available data space per data block

Calculate the combined column lengths of the average row

Calculate the total average row size.

Calculate the average number rows that can fit in a block

Calculate the number of blocks and bytes required for the table.

After arriving the calculation, add 10 % additional space to calculate the initial extent size for a working table.

86. It is possible to use raw devices as data files and what are the advantages over file system files?

Yes.

The advantages over file system files are that I/O will be improved because Oracle is bye-passing the kernel which writing into disk. Disk corruption will be very less.

87. What is a Control file?

Database's overall physical architecture is maintained in a file called control file. It will be used to maintain internal consistency and guide recovery operations. Multiple copies of control files are advisable.

88. How to implement the multiple control files for an existing database?

Shutdown the database

Copy one of the existing controlfile to new location

Edit Config ora file by adding new control filename

Restart the database.

89. What is redo log file mirroring?  How can be achieved?

Process of having a copy of redo log files is called mirroring.

This can be achieved by creating group of log files together, so that LGWR will automatically writes them to all the members of the current on-line redo log group. If any one group fails then database automatically switch over to next group. It degrades performance.

90. What is advantage of having disk shadowing / mirroring?

Shadow set of disks save as a backup in the event of disk failure. In most operating systems if any disk failure occurs it automatically switchover to place of failed disk.

Improved performance because most OS support volume shadowing can direct file I/O request to use the shadow set of files instead of the main set of files. This reduces I/O load on the main set of disks.

91. What is use of rollback segments in Oracle database?

They allow the database to maintain read consistency between multiple transactions.

92. What is a rollback segment entry?

It is the set of before image data blocks that contain rows that are modified by a transaction.

Each rollback segment entry must be completed within one rollback segment.

A single rollback segment can have multiple rollback segment entries.

93. What is hit ratio?

It is a measure of well the data cache buffer is handling requests for data.

Hit Ratio = (Logical Reads - Physical Reads - Hits Misses)/ Logical Reads.

94. When will be a segment released?

When Segment is dropped.

When Shrink (RBS only)

When truncated (TRUNCATE used with drop storage option)

95. What are disadvantages of having raw devices?

We should depend on export/import utility for backup/recovery (fully reliable)

The tar command cannot be used for physical file backup, instead we can use dd command, which is less flexible and has limited recoveries.

96. List the factors that can affect the accuracy of the estimations?

- The space used transaction entries and deleted records, does not become free immediately after completion due to delayed cleanout.

- Trailing nulls and length bytes are not stored.

- Inserts of, updates to and deletes of rows as well as columns larger than a single data block, can cause fragmentation a chained row pieces.

SQL*Plus Statements

  

100. What are the types of SQL statement?

Data Definition Language: CREATE, ALTER, DROP, TRUNCATE, REVOKE, NO AUDIT & COMMIT.

Data Manipulation Language: INSERT, UPDATE, DELETE, LOCK TABLE, EXPLAIN PLAN & SELECT.

Transactional Control: COMMIT & ROLLBACK

Session Control: ALTERSESSION & SET ROLE

System Control: ALTER SYSTEM.

101. What is a transaction?

Transaction is logical unit between two commits and commit and rollback.

102. What is difference between TRUNCATE & DELETE?

TRUNCATE commits after deleting entire table i.e., cannot be rolled back.

Database triggers do not fire on TRUNCATE

DELETE allows the filtered deletion. Deleted records can be rolled back or committed.

Database triggers fire on DELETE.

103. What is a join? Explain the different types of joins?

Join is a query, which retrieves related columns or rows from multiple tables.

Self Join - Joining the table with itself.

Equi Join - Joining two tables by equating two common columns.

Non-Equi Join - Joining two tables by equating two common columns.

Outer Join - Joining two tables in such a way that query can also retrieve rows that do not have corresponding join value in the other table.

104. What is the sub-query?

Sub-query is a query whose return values are used in filtering conditions of the main query.

105. What is correlated sub-query?

Correlated sub-query is a sub-query, which has reference to the main query.

106. Explain CONNECT BY PRIOR?

Retrieves rows in hierarchical order eg.

select empno, ename from emp where.

107. Difference between SUBSTR and INSTR?

INSTR (String1, String2 (n, (m)),

INSTR returns the position of the m-th occurrence of the string 2 in string1. The search begins from nth position of string1.

SUBSTR (String1 n, m)

SUBSTR returns a character string of size m in string1, starting from n-th position of string1.

108. Explain UNION, MINUS, UNION ALL and INTERSECT?

INTERSECT   - returns all distinct rows selected by both queries.

MINUS            - returns all distinct rows selected by the first query but not by the second.

UNION            - returns all distinct rows selected by either query

UNION ALL    - returns all rows selected by either query, including all duplicates.

109. What is ROWID?

ROWID is a pseudo column attached to each row of a table. It is 18 characters long, blockno, rownumber are the components of ROWID.

110. What is the fastest way of accessing a row in a table?

Using ROWID.

CONSTRAINTS

111. What is an integrity constraint?

Integrity constraint is a rule that restricts values to a column in a table.

112. What is referential integrity constraint?

Maintaining data integrity through a set of rules that restrict the values of one or more columns of the tables based on the values of primary key or unique key of the referenced table.

113. What is the usage of SAVEPOINTS?

SAVEPOINTS are used to subdivide a transaction into smaller parts. It enables rolling back part of a transaction. Maximum of five save points are allowed.

114.  What is ON DELETE CASCADE?

When ON DELETE CASCADE is specified Oracle maintains referential integrity by automatically removing dependent foreign key values if a referenced primary or unique key value is removed.

115. What are the data types allowed in a table?

CHAR, VARCHAR2, NUMBER, DATE, RAW, LONG and LONG RAW.

116. What is difference between CHAR and VARCHAR2?  What is the maximum SIZE allowed for each type?

CHAR pads blank spaces to the maximum length.

VARCHAR2 does not pad blank spaces.

For CHAR the maximum length is 255 and 2000 for VARCHAR2.

117.  How many LONG columns are allowed in a table? Is it possible to use LONG columns in WHERE clause or ORDER BY?

Only one LONG column is allowed. It is not possible to use LONG column in WHERE or ORDER BY clause.

118. What are the pre-requisites to modify datatype of a column and to add a column with NOT NULL constraint?

 - To modify the datatype of a column the column must be empty.

 - To add a column with NOT NULL constrain, the table must be empty.

119. Where the integrity constraints are stored in data dictionary?

The integrity constraints are stored in USER_CONSTRAINTS.

120. How will you activate/deactivate integrity constraints?

The integrity constraints can be enabled or disabled by ALTER TABLE ENABLE CONSTRAINT / DISABLE CONSTRAINT.

121. If unique key constraint on DATE column is created, will it validate the rows that are inserted with SYSDATE?

It won't, Because SYSDATE format contains time attached with it.

122. What is a database link?

Database link is a named path through which a remote database can be accessed.

123. How to access the current value and next value from a sequence? Is it possible to access the current value in a session before accessing next value?

Sequence name CURRVAL, sequence name NEXTVAL. It is not possible. Only if you access next value in the session, current value can be accessed.

124. What is CYCLE/NO CYCLE in a Sequence?

CYCLE specifies that the sequence continue to generate values after reaching either maximum or minimum value. After pan-ascending sequence reaches its maximum value, it generates its minimum value. After a descending sequence reaches its minimum, it generates its maximum.

NO CYCLE specifies that the sequence cannot generate more values after reaching its maximum or minimum value.

125. What are the advantages of VIEW?

- To protect some of the columns of a table from other users.

- To hide complexity of a query.

- To hide complexity of calculations.

126. Can a view be updated/inserted/deleted? If Yes - under what conditions?

A View can be updated/deleted/inserted if it has only one base table if the view is based on columns from one or more tables then insert, update and delete is not possible.

127. If a view on a single base table is manipulated will the changes be reflected on the base table?

If changes are made to the tables and these tables are the base tables of a view, then the changes will be reference on the view.

Q) What are the Various Master and Detail Relation ships.

A) The various Master and Detail Relationship are

        a) NonIsolated :: The Master cannot be deleted when a child is exisiting

        b) Isolated    :: The Master can be deleted when the child is exisiting

        c) Cascading   :: The child gets deleted when the Master is deleted.

Q) What is the Difference between a post query and a pre query

A) A post query will fire for every row that is fetched but the pre query will fire only once.

Q) How do you implement one-to-one, one-to-many and many-to-many relationships while designing tables?

A) One-to-One relationship can be implemented as a single table and rarely as two tables with primary and foreign key relationships.

One-to-Many relationships are implemented by splitting the data into two tables with primary key and foreign key relationships.

Many-to-Many relationships are implemented using a junction table with the keys from both the tables forming the composite primary key of the junction table.

Q) Can the following Query be Optimized?

SELECT CID FROM Course WHERE title LIKE ’CPS%’ AND min_enroll > (SELECT COUNT(*) FROM Enroll WHERE Enroll.CID = Course.CID);

A) The query is very expensive,s ince it is evaluated once for every CPS course, yes it can be optimised via the followig

        • Process the outer query without the subquery

        - CREATE VIEW Supp_Course AS SElect * from Course Where title like 'CPS%'

        • Collect bindings

        – CREATE VIEW Magic AS SELECT DISTINCT CID FROM Supp_Course;

        • Evaluate the subquery with bindings

        – CREATE VIEW DS AS sELECT Enroll.CID, COUNT(*) AS cnt FROM Magic, Enroll 

          WHERE Magic.CID = Enroll.CID 

          GROUP BY Enroll.CID;

          UNION

          SELECT Magic.CID, 0 AS cnt -- the COUNT patch FROM Magic 

          WHERE Magic.CID NOT IN(SELECT CID FROM Enroll);

        • Finally, refine the outer query

        – SELECT Supp_Course.CID FROM Supp_Course, DS 

          WHERE Supp_Course.CID = DS.CID AND min_enroll > DS.cnt;

Q) Which one of the two queries gives the best performance 

         (using sub-q)

        select person,birth_yr

        from data

        where birth_yr in

               (select birth_yr

                from data

                group by birth_yr

                       having count(person) >1 )

        (using join)

        select a.person, b.person, a.birth_yr

        from data a, data b

        where a.birth_yr = b.birth_yr

          and a.person < b.person

A) in the above scenario, the subquery gives the best performance since the join iterates for each person affecting performance.

1.     Explain the difference between a hot backup and a cold backup and the benefits associated with each.
A hot backup is basically taking a backup of the database while it is still up and running and it must be in archive log mode. A cold backup is taking a backup of the database while it is shut down and does not require being in archive log mode. The benefit of taking a hot backup is that the database is still available for use while the backup is occurring and you can recover the database to any point in time. The benefit of taking a cold backup is that it is typically easier to administer the backup and recovery process. In addition, since you are taking cold backups the database does not require being in archive log mode and thus there will be a slight performance gain as the database is not cutting archive logs to disk.
2.     You have just had to restore from backup and do not have any control files. How would you go about bringing up this database?
I would create a text based backup control file, stipulating where on disk all the data files where and then issue the recover command with the using backup control file clause.
3.     How do you switch from an init.ora file to a spfile?
Issue the create spfile from pfile command.
4.     Explain the difference between a data block, an extent and a segment.
A data block is the smallest unit of logical storage for a database object. As objects grow they take chunks of additional storage that are composed of contiguous data blocks. These groupings of contiguous data blocks are called extents. All the extents that an object takes when grouped together are considered the segment of the database object.
5.     Give two examples of how you might determine the structure of the table DEPT.
Use the describe command or use the dbms_metadata.get_ddl package.
6.     Where would you look for errors from the database engine?
In the alert log.
7.     Compare and contrast TRUNCATE and DELETE for a table.
Both the truncate and delete command have the desired outcome of getting rid of all the rows in a table. The difference between the two is that the truncate command is a DDL operation and just moves the high water mark and produces a now rollback. The delete command, on the other hand, is a DML operation, which will produce a rollback and thus take longer to complete.
8.     Give the reasoning behind using an index.
Faster access to data blocks in a table.
9.     Give the two types of tables involved in producing a star schema and the type of data they hold.
Fact tables and dimension tables. A fact table contains measurements while dimension tables will contain data that will help describe the fact tables.
10. . What type of index should you use on a fact table?
A Bitmap index.
11. Give two examples of referential integrity constraints.
A primary key and a foreign key.
12. A table is classified as a parent table and you want to drop and re-create it. How would you do this without affecting the children tables?
Disable the foreign key constraint to the parent, drop the table, re-create the table, enable the foreign key constraint.
13. Explain the difference between ARCHIVELOG mode and NOARCHIVELOG mode and the benefits and disadvantages to each.
ARCHIVELOG mode is a mode that you can put the database in for creating a backup of all transactions that have occurred in the database so that you can recover to any point in time. NOARCHIVELOG mode is basically the absence of ARCHIVELOG mode and has the disadvantage of not being able to recover to any point in time. NOARCHIVELOG mode does have the advantage of not having to write transactions to an archive log and thus increases the performance of the database slightly.
14. What command would you use to create a backup control file?
Alter database backup control file to trace.
15. Give the stages of instance startup to a usable state where normal users may access it.
STARTUP NOMOUNT - Instance startup
STARTUP MOUNT - The database is mounted
STARTUP OPEN - The database is opened
16. What column differentiates the V$ views to the GV$ views and how?
The INST_ID column which indicates the instance in a RAC environment the information came from.
17. How would you go about generating an EXPLAIN plan?
Create a plan table with utlxplan.sql.
Use the explain plan set statement_id = 'tst1' into plan_table for a SQL statement
Look at the explain plan with utlxplp.sql or utlxpls.sql
18. How would you go about increasing the buffer cache hit ratio?
Use the buffer cache advisory over a given workload and then query the v$db_cache_advice table. If a change was necessary then I would use the alter system set db_cache_size command.
19. Explain an ORA-01555
You get this error when you get a snapshot too old within rollback. It can usually be solved by increasing the undo retention or increasing the size of rollbacks. You should also look at the logic involved in the application getting the error message.
20. Explain the difference between $ORACLE_HOME and $ORACLE_BASE.
ORACLE_BASE is the root directory for oracle. ORACLE_HOME located beneath ORACLE_BASE is where the oracle products reside.
21.  How would you determine the time zone under which a database was operating?

select DBTIMEZONE from dual;

22.  Explain the use of setting GLOBAL_NAMES equal to TRUE.
Setting GLOBAL_NAMES dictates how you might connect to a database. This variable is either TRUE or FALSE and if it is set to TRUE it enforces database links to have the same name as the remote database to which they are linking.
23.  What command would you use to encrypt a PL/SQL application?
WRAP
24.  Explain the difference between a FUNCTION, PROCEDURE and PACKAGE.
A function and procedure are the same in that they are intended to be a collection of PL/SQL code that carries a single task. While a procedure does not have to return any values to the calling application, a function will return a single value. A package on the other hand is a collection of functions and procedures that are grouped together based on their commonality to a business function or application.
25.  Explain the use of table functions.
Table functions are designed to return a set of rows through PL/SQL logic but are intended to be used as a normal table or view in a SQL statement. They are also used to pipeline information in an ETL process.
26.  Name three advisory statistics you can collect.
Buffer Cache Advice, Segment Level Statistics, & Timed Statistics
27.  Where in the Oracle directory tree structure are audit traces placed?
In unix $ORACLE_HOME/rdbms/audit, in Windows the event viewer
28.  Explain materialized views and how they are used.
Materialized views are objects that are reduced sets of information that have been summarized, grouped, or aggregated from base tables. They are typically used in data warehouse or decision support systems.
29.  When a user process fails, what background process cleans up after it?
PMON
30.  What background process refreshes materialized views?
The Job Queue Processes.
31.  How would you determine what sessions are connected and what resources they are waiting for?
Use of V$SESSION and V$SESSION_WAIT
32.  Describe what redo logs are.
Redo logs are logical and physical structures that are designed to hold all the changes made to a database and are intended to aid in the recovery of a database.
33.  How would you force a log switch?

ALTER SYSTEM SWITCH LOGFILE;

34.  Give two methods you could use to determine what DDL changes have been made.
You could use Logminer or Streams
35.  What does coalescing a tablespace do?
Coalescing is only valid for dictionary-managed tablespaces and de-fragments space by combining neighboring free extents into large single extents.
36.  What is the difference between a TEMPORARY tablespace and a PERMANENT tablespace?
A temporary tablespace is used for temporary objects such as sort structures while permanent tablespaces are used to store those objects meant to be used as the true objects of the database.
37.  Name a tablespace automatically created when you create a database.
The SYSTEM tablespace.
38.  When creating a user, what permissions must you grant to allow them to connect to the database?
Grant the CONNECT to the user.
39.  How do you add a data file to a tablespace?

ALTER TABLESPACE <tablespace_name> ADD DATAFILE <datafile_name> SIZE <size>

40.  How do you resize a data file?

ALTER DATABASE DATAFILE <datafile_name> RESIZE <new_size>;

41.  What view would you use to look at the size of a data file?

DBA_DATA_FILES

42.  What view would you use to determine free space in a tablespace?

DBA_FREE_SPACE

43.  How would you determine who has added a row to a table?
Turn on fine grain auditing for the table.
44.  How can you rebuild an index?

ALTER INDEX <index_name> REBUILD;

45.  Explain what partitioning is and what its benefit is.
Partitioning is a method of taking large tables and indexes and splitting them into smaller, more manageable pieces.
46.  You have just compiled a PL/SQL package but got errors, how would you view the errors?

SHOW ERRORS

47.  How can you gather statistics on a table?
The ANALYZE command.
48.  How can you enable a trace for a session?
Use the DBMS_SESSION.SET_SQL_TRACE or
Use ALTER SESSION SET SQL_TRACE = TRUE;
49.  What is the difference between the SQL*Loader and IMPORT utilities?
These two Oracle utilities are used for loading data into the database. The difference is that the import utility relies on the data being produced by another Oracle utility EXPORT while the SQL*Loader utility allows data to be loaded that has been produced by other utilities from different data sources just so long as it conforms to ASCII formatted or delimited files.
50.  Name two files used for network connection to a database.
TNSNAMES.ORA and SQLNET.ORA

Technical - UNIX

Every DBA should know something about the operating system that the database will be running on. The questions here are related to UNIX but you should equally be able to answer questions related to common Windows environments.
1.  How do you list the files in an UNIX directory while also showing hidden files?

ls -ltra

2.  How do you execute a UNIX command in the background?
Use the "&"
3.  What UNIX command will control the default file permissions when files are created?
Umask
4.  Explain the read, write, and execute permissions on a UNIX directory.
Read allows you to see and list the directory contents.
Write allows you to create, edit and delete files and subdirectories in the directory.
Execute gives you the previous read/write permissions plus allows you to change into the directory and execute programs or shells from the directory.
5.  the difference between a soft link and a hard link?
A symbolic (soft) linked file and the targeted file can be located on the same or different file system while for a hard link they must be located on the same file system.
6.  Give the command to display space usage on the UNIX file system.

df -lk

7.  Explain iostat, vmstat and netstat.
Iostat reports on terminal, disk and tape I/O activity.
Vmstat reports on virtual memory statistics for processes, disk, tape and CPU activity.
Netstat reports on the contents of network data structures.
8.  How would you change all occurrences of a value using VI?
Use :%s/<old>/<new>/g
9.  Give two UNIX kernel parameters that effect an Oracle install
SHMMAX& SHMMNI
10.  Briefly, how do you install Oracle software on UNIX.

Basically, set up disks, kernel parameters, and run orainst.

1.      To see current user name
 Sql> show user;
2.      Change SQL prompt name
 SQL> set sqlprompt “Manimara > “
Manimara >
Manimara >
3.      Switch to DOS prompt
 SQL> host
4.      How do I eliminate the duplicate rows ?
 SQL> delete from table_name where rowid not in (select max(rowid) from table group by duplicate_values_field_name);
or
SQL> delete duplicate_values_field_name dv from table_name ta where rowid< (select min(rowid)  from table_name tb where ta.dv=tb.dv);
Example.
Table Emp
Empno Ename
101               Scott
102               Jiyo
103               Millor
104               Jiyo
105               Smith
delete ename from emp a where rowid < ( select min(rowid) from emp b where a.ename = b.ename);
The output like,
Empno Ename
101               Scott
102               Millor
103               Jiyo
104               Smith
5.      How do I display row number with records?
To achive this use rownum pseudocolumn with query, like SQL> SQL> select rownum, ename from emp;
Output:
1                    Scott
2                    Millor
3                    Jiyo
4                    Smith
6.      Display the records between two range
select rownum, empno, ename  from emp  where  rowid in
 (select rowid from emp where rownum <=&upto
 minus
 select rowid from emp where rownum<&Start);
Enter value for upto: 10
Enter value for Start: 7
   ROWNUM     EMPNO ENAME
--------- --------- ----------
        1      7782 CLARK
        2      7788 SCOTT
        3      7839 KING
        4      7844 TURNER
7.      I know the nvl function only allows the same data type(ie. number or char or date Nvl(comm, 0)), if commission is null then the text “Not Applicable”  want to display, instead of blank space. How do I write the query?
 SQL> select nvl(to_char(comm.),'NA') from emp;
Output :
NVL(TO_CHAR(COMM),'NA')
-----------------------
NA
300
500
NA
1400
NA
NA
8.      Oracle cursor : Implicit & Explicit cursors
Oracle uses work areas called private SQL areas to create SQL statements.
PL/SQL construct to identify each and every work are used, is called as Cursor.
For SQL queries returning a single row, PL/SQL declares all implicit cursors.
For queries that returning more than one row, the cursor needs to be explicitly declared.
9.      Explicit Cursor attributes
 There are four cursor attributes used in Oracle
cursor_name%Found, cursor_name%NOTFOUND, cursor_name%ROWCOUNT, cursor_name%ISOPEN
10.  Implicit Cursor attributes
 Same as explicit cursor but prefixed by the word SQL
SQL%Found, SQL%NOTFOUND, SQL%ROWCOUNT, SQL%ISOPEN
Tips : 1. Here SQL%ISOPEN is false, because oracle automatically closed the implicit cursor after executing SQL statements.
       : 2.  All are  Boolean attributes.
11.  Find out nth highest salary from emp table
 SELECT DISTINCT (a.sal) FROM EMP A WHERE &N = (SELECT COUNT (DISTINCT (b.sal)) FROM EMP B WHERE a.sal<=b.sal);
Enter value for n: 2
      SAL
---------
     3700
12.  To view installed Oracle version information
 SQL> select banner from v$version;
13.  Display the number value in Words
 SQL> select sal, (to_char(to_date(sal,'j'), 'jsp'))
from emp;
the output like,
      SAL (TO_CHAR(TO_DATE(SAL,'J'),'JSP'))
--------- -----------------------------------------------------
      800 eight hundred
     1600 one thousand six hundred
     1250 one thousand two hundred fifty
If you want to add some text like,
Rs. Three Thousand only.
SQL> select sal  "Salary ",
 (' Rs. '|| (to_char(to_date(sal,'j'), 'Jsp'))|| ' only.'))
 "Sal in Words" from emp
/
Salary  Sal in Words
------- ------------------------------------------------------
    800  Rs. Eight Hundred only.
   1600  Rs. One Thousand Six Hundred only.
   1250  Rs. One Thousand Two Hundred Fifty only.
14.  Display Odd/ Even number of records
 Odd number of records:
select * from emp where (rowid,1) in (select rowid, mod(rownum,2) from emp);
1
3
5
Even number of records:
select * from emp where (rowid,0) in (select rowid, mod(rownum,2) from emp)
2
4
6
15.  Which date function returns number value?
 months_between
16.  Any three PL/SQL Exceptions?
 Too_many_rows, No_Data_Found, Value_Error, Zero_Error, Others
17.  What are PL/SQL Cursor Exceptions?
 Cursor_Already_Open, Invalid_Cursor
18.  Other way to replace query result null value with a text
 SQL> Set NULL ‘N/A’
to reset SQL> Set NULL ‘’
19.   What are the more common pseudo-columns?
 SYSDATE, USER , UID, CURVAL, NEXTVAL, ROWID, ROWNUM
20.   What is the output of SIGN function?
 1 for positive value,
0 for Zero,
-1 for Negative value.

21.  What is the maximum number of triggers, can apply to a single table?
 12 triggers.

Interview Questions for Oracle, DBA, Developer Candidates
PL/SQL Questions:
1. Describe the difference between a procedure, function and anonymous pl/sql block.
Level: Low
Expected answer : Candidate should mention use of DECLARE statement, a function must return a value while a procedure doesn?t have to.
2. What is a mutating table error and how can you get around it?
Level: Intermediate
Expected answer: This happens with triggers. It occurs because the trigger is trying to update a row it is currently using. The usual fix involves either use of views or temporary tables so the database is selecting from one while updating the other.
3. Describe the use of %ROWTYPE and %TYPE in PL/SQL
Level: Low
Expected answer: %ROWTYPE allows you to associate a variable with an entire table row. The %TYPE associates a variable with a single column type.
4. What packages (if any) has Oracle provided for use by developers?
Level: Intermediate to high
Expected answer: Oracle provides the DBMS_ series of packages. There are many which developers should be aware of such as DBMS_SQL, DBMS_PIPE, DBMS_TRANSACTION, DBMS_LOCK, DBMS_ALERT, DBMS_OUTPUT, DBMS_JOB, DBMS_UTILITY, DBMS_DDL, UTL_FILE. If they can mention a few of these and describe how they used them, even better. If they include the SQL routines provided by Oracle, great, but not really what was asked.
5. Describe the use of PL/SQL tables
Level: Intermediate
Expected answer: PL/SQL tables are scalar arrays that can be referenced by a binary integer. They can be used to hold values for use in later queries or calculations. In Oracle 8 they will be able to be of the %ROWTYPE designation, or RECORD.
6. When is a declare statement needed ?
Level: Low
The DECLARE statement is used in PL/SQL anonymous blocks such as with stand alone, non-stored PL/SQL procedures. It must come first in a PL/SQL stand alone file if it is used.
7. In what order should a open/fetch/loop set of commands in a PL/SQL block be implemented if you use the %NOTFOUND cursor variable in the exit when statement? Why?
Level: Intermediate
Expected answer: OPEN then FETCH then LOOP followed by the exit when. If not specified in this order will result in the final return being done twice because of the way the %NOTFOUND is handled by PL/SQL.
8. What are SQLCODE and SQLERRM and why are they important for PL/SQL developers?
Level: Intermediate
Expected answer: SQLCODE returns the value of the error number for the last error encountered. The SQLERRM returns the actual error message for the last error encountered. They can be used in exception handling to report, or, store in an error log table, the error that occurred in the code. These are especially useful for the WHEN OTHERS exception.
9. How can you find within a PL/SQL block, if a cursor is open?
Level: Low
Expected answer: Use the %ISOPEN cursor status variable.
10. How can you generate debugging output from PL/SQL?
Level:Intermediate to high
Expected answer: Use the DBMS_OUTPUT package. Another possible method is to just use the SHOW ERROR command, but this only shows errors. The DBMS_OUTPUT package can be used to show intermediate results from loops and the status of variables as the procedure is executed. The new package UTL_FILE can also be used.
11. What are the types of triggers?
Level:Intermediate to high
Expected Answer: There are 12 types of triggers in PL/SQL that consist of combinations of the BEFORE, AFTER, ROW, TABLE, INSERT, UPDATE, DELETE and ALL key words:
BEFORE ALL ROW INSERT
AFTER ALL ROW INSERT
BEFORE INSERT
AFTER INSERT etc.
DBA:
1. Give one method for transferring a table from one schema to another:
Level:Intermediate
Expected Answer: There are several possible methods, export-import, CREATE TABLE... AS SELECT, or COPY.
2. What is the purpose of the IMPORT option IGNORE? What is it?s default setting?
Level: Low
Expected Answer: The IMPORT IGNORE option tells import to ignore "already exists" errors. If it is not specified the tables that already exist will be skipped. If it is specified, the error is ignored and the tables data will be inserted. The default value is N.
3. You have a rollback segment in a version 7.2 database that has expanded beyond optimal, how can it be restored to optimal?
Level: Low
Expected answer: Use the ALTER TABLESPACE ..... SHRINK command.
4. If the DEFAULT and TEMPORARY tablespace clauses are left out of a CREATE USER command what happens? Is this bad or good? Why?
Level: Low
Expected answer: The user is assigned the SYSTEM tablespace as a default and temporary tablespace. This is bad because it causes user objects and temporary segments to be placed into the SYSTEM tablespace resulting in fragmentation and improper table placement (only data dictionary objects and the system rollback segment should be in SYSTEM).
5. What are some of the Oracle provided packages that DBAs should be aware of?
Level: Intermediate to High
Expected answer: Oracle provides a number of packages in the form of the DBMS_ packages owned by the SYS user. The packages used by DBAs may include: DBMS_SHARED_POOL, DBMS_UTILITY, DBMS_SQL, DBMS_DDL, DBMS_SESSION, DBMS_OUTPUT and DBMS_SNAPSHOT. They may also try to answer with the UTL*.SQL or CAT*.SQL series of SQL procedures. These can be viewed as extra credit but aren?t part of the answer.
6. What happens if the constraint name is left out of a constraint clause?
Level: Low
Expected answer: The Oracle system will use the default name of SYS_Cxxxx where xxxx is a system generated number. This is bad since it makes tracking which table the constraint belongs to or what the constraint does harder.
7. What happens if a tablespace clause is left off of a primary key constraint clause?
Level: Low
Expected answer: This results in the index that is automatically generated being placed in then users default tablespace. Since this will usually be the same tablespace as the table is being created in, this can cause serious performance problems.
8. What is the proper method for disabling and re-enabling a primary key constraint?
Level: Intermediate
Expected answer: You use the ALTER TABLE command for both. However, for the enable clause you must specify the USING INDEX and TABLESPACE clause for primary keys.
9. What happens if a primary key constraint is disabled and then enabled without fully specifying the index clause?
Level: Intermediate
Expected answer: The index is created in the user?s default tablespace and all sizing information is lost. Oracle doesn?t store this information as a part of the constraint definition, but only as part of the index definition, when the constraint was disabled the index was dropped and the information is gone.
10. (On UNIX) When should more than one DB writer process be used? How many should be used?
Level: High
Expected answer: If the UNIX system being used is capable of asynchronous IO then only one is required, if the system is not capable of asynchronous IO then up to twice the number of disks used by Oracle number of DB writers should be specified by use of the db_writers initialization parameter.
11. You are using hot backup without being in archivelog mode, can you recover in the event of a failure? Why or why not?
Level: High
Expected answer: You can?t use hot backup without being in archivelog mode. So no, you couldn?t recover.
12. What causes the "snapshot too old" error? How can this be prevented or mitigated?
Level: Intermediate
Expected answer: This is caused by large or long running transactions that have either wrapped onto their own rollback space or have had another transaction write on part of their rollback space. This can be prevented or mitigated by breaking the transaction into a set of smaller transactions or increasing the size of the rollback segments and their extents.
13. How can you tell if a database object is invalid?
Level: Low
Expected answer: By checking the status column of the DBA_, ALL_ or USER_OBJECTS views, depending upon whether you own or only have permission on the view or are using a DBA account.
14. A user is getting an ORA-00942 error yet you know you have granted them permission on the table, what else should you check?
Level: Low
Expected answer: You need to check that the user has specified the full name of the object (select empid from scott.emp; instead of select empid from emp;) or has a synonym that points to the object (create synonym emp for scott.emp;)
15. A developer is trying to create a view and the database won?t let him. He has the "DEVELOPER" role which has the "CREATE VIEW" system privilege and SELECT grants on the tables he is using, what is the problem?
Level: Intermediate
Expected answer: You need to verify the developer has direct grants on all tables used in the view. You can?t create a stored object with grants given through views.
16. If you have an example table, what is the best way to get sizing data for the production table implementation?
Level: Intermediate
Expected answer: The best way is to analyze the table and then use the data provided in the DBA_TABLES view to get the average row length and other pertinent data for the calculation. The quick and dirty way is to look at the number of blocks the table is actually using and ratio the number of rows in the table to its number of blocks against the number of expected rows.
17. How can you find out how many users are currently logged into the database? How can you find their operating system id?
Level: high
Expected answer: There are several ways. One is to look at the v$session or v$process views. Another way is to check the current_logins parameter in the v$sysstat view. Another if you are on UNIX is to do a "ps -ef|grep oracle|wc -l? command, but this only works against a single instance installation.
18. A user selects from a sequence and gets back two values, his select is:
SELECT pk_seq.nextval FROM dual;
What is the problem?
Level: Intermediate
Expected answer: Somehow two values have been inserted into the dual table. This table is a single row, single column table that should only have one value in it.
19. How can you determine if an index needs to be dropped and rebuilt?
Level: Intermediate
Expected answer: Run the ANALYZE INDEX command on the index to validate its structure and then calculate the ratio of LF_BLK_LEN/LF_BLK_LEN+BR_BLK_LEN and if it isn?t near 1.0 (i.e. greater than 0.7 or so) then the index should be rebuilt. Or if the ratio
BR_BLK_LEN/ LF_BLK_LEN+BR_BLK_LEN is nearing 0.3.
SQL/ SQLPlus
1. How can variables be passed to a SQL routine?
Level: Low
Expected answer: By use of the & symbol. For passing in variables the numbers 1-8 can be used (&1, &2,...,&8) to pass the values after the command into the SQLPLUS session. To be prompted for a specific variable, place the ampersanded variable in the code itself:
"select * from dba_tables where owner=&owner_name;" . Use of double ampersands tells SQLPLUS to resubstitute the value for each subsequent use of the variable, a single ampersand will cause a reprompt for the value unless an ACCEPT statement is used to get the value from the user.
2. You want to include a carriage return/linefeed in your output from a SQL script, how can you do this?
Level: Intermediate to high
Expected answer: The best method is to use the CHR() function (CHR(10) is a return/linefeed) and the concatenation function "||". Another method, although it is hard to document and isn?t always portable is to use the return/linefeed as a part of a quoted string.
3. How can you call a PL/SQL procedure from SQL?
Level: Intermediate
Expected answer: By use of the EXECUTE (short form EXEC) command.
4. How do you execute a host operating system command from within SQL?
Level: Low
Expected answer: By use of the exclamation point "!" (in UNIX and some other OS) or the HOST (HO) command.
5. You want to use SQL to build SQL, what is this called and give an example
Level: Intermediate to high
Expected answer: This is called dynamic SQL. An example would be:
set lines 90 pages 0 termout off feedback off verify off
spool drop_all.sql
select ?drop user ?||username||? cascade;? from dba_users
where username not in ("SYS?,?SYSTEM?);
spool off
Essentially you are looking to see that they know to include a command (in this case DROP USER...CASCADE;) and that you need to concatenate using the ?||? the values selected from the database.
6. What SQLPlus command is used to format output from a select?
Level: low
Expected answer: This is best done with the COLUMN command.
7. You want to group the following set of select returns, what can you group on?
Max(sum_of_cost), min(sum_of_cost), count(item_no), item_no
Level: Intermediate
Expected answer: The only column that can be grouped on is the "item_no" column, the rest have aggregate functions associated with them.
8. What special Oracle feature allows you to specify how the cost based system treats a SQL statement?
Level: Intermediate to high
Expected answer: The COST based system allows the use of HINTs to control the optimizer path selection. If they can give some example hints such as FIRST ROWS, ALL ROWS, USING INDEX, STAR, even better.
9. You want to determine the location of identical rows in a table before attempting to place a unique index on the table, how can this be done?
Level: High
Expected answer: Oracle tables always have one guaranteed unique column, the rowid column. If you use a min/max function against your rowid and then select against the proposed primary key you can squeeze out the rowids of the duplicate rows pretty quick. For example:
select rowid from emp e
where e.rowid > (select min(x.rowid)
from emp x
where x.emp_no = e.emp_no);
In the situation where multiple columns make up the proposed key, they must all be used in the where clause.
10. What is a Cartesian product?
Level: Low
Expected answer: A Cartesian product is the result of an unrestricted join of two or more tables. The result set of a three table Cartesian product will have x * y * z number of rows where x, y, z correspond to the number of rows in each table involved in the join.
11. You are joining a local and a remote table, the network manager complains about the traffic involved, how can you reduce the network traffic?
Level: High
Expected answer: Push the processing of the remote data to the remote instance by using a view to pre-select the information for the join. This will result in only the data required for the join being sent across.
12. What is the default ordering of an ORDER BY clause in a SELECT statement?
Level: Low
Expected answer: Ascending
13. What is tkprof and how is it used?
Level: Intermediate to high
Expected answer: The tkprof tool is a tuning tool used to determine cpu and execution times for SQL statements. You use it by first setting timed_statistics to true in the initialization file and then turning on tracing for either the entire database via the sql_trace parameter or for the session using the ALTER SESSION command. Once the trace file is generated you run the tkprof tool against the trace file and then look at the output from the tkprof tool. This can also be used to generate explain plan output.
14. What is explain plan and how is it used?
Level: Intermediate to high
Expected answer: The EXPLAIN PLAN command is a tool to tune SQL statements. To use it you must have an explain_table generated in the user you are running the explain plan for. This is created using the utlxplan.sql script. Once the explain plan table exists you run the explain plan command giving as its argument the SQL statement to be explained. The explain_plan table is then queried to see the execution plan of the statement. Explain plans can also be run using tkprof.
15. How do you set the number of lines on a page of output? The width?
Level: Low
Expected answer: The SET command in SQLPLUS is used to control the number of lines generated per page and the width of those lines, for example SET PAGESIZE 60 LINESIZE 80 will generate reports that are 60 lines long with a line width of 80 characters. The PAGESIZE and LINESIZE options can be shortened to PAGES and LINES.
16. How do you prevent output from coming to the screen?
Level: Low
Expected answer: The SET option TERMOUT controls output to the screen. Setting TERMOUT OFF turns off screen output. This option can be shortened to TERM.
17. How do you prevent Oracle from giving you informational messages during and after a SQL statement execution?
Level: Low
Expected answer: The SET options FEEDBACK and VERIFY can be set to OFF.
18. How do you generate file output from SQL?
Level: Low
Expected answer: By use of the SPOOL command
Tuning Questions:
1. A tablespace has a table with 30 extents in it. Is this bad? Why or why not.
Level: Intermediate
Expected answer: Multiple extents in and of themselves aren?t bad. However if you also have chained rows this can hurt performance.
2. How do you set up tablespaces during an Oracle installation?
Level: Low
Expected answer: You should always attempt to use the Oracle Flexible Architecture standard or another partitioning scheme to ensure proper separation of SYSTEM, ROLLBACK, REDO LOG, DATA, TEMPORARY and INDEX segments.
3. You see multiple fragments in the SYSTEM tablespace, what should you check first?
Level: Low
Expected answer: Ensure that users don?t have the SYSTEM tablespace as their TEMPORARY or DEFAULT tablespace assignment by checking the DBA_USERS view.
4. What are some indications that you need to increase the SHARED_POOL_SIZE parameter?
Level: Intermediate
Expected answer: Poor data dictionary or library cache hit ratios, getting error ORA-04031. Another indication is steadily decreasing performance with all other tuning parameters the same.
5. What is the general guideline for sizing db_block_size and db_multi_block_read for an application that does many full table scans?
Level: High
Expected answer: Oracle almost always reads in 64k chunks. The two should have a product equal to 64 or a multiple of 64.
6. What is the fastest query method for a table?
Level: Intermediate
Expected answer: Fetch by rowid
7. Explain the use of TKPROF? What initialization parameter should be turned on to get full TKPROF output?
Level: High
Expected answer: The tkprof tool is a tuning tool used to determine cpu and execution times for SQL statements. You use it by first setting timed_statistics to true in the initialization file and then turning on tracing for either the entire database via the sql_trace parameter or for the session using the ALTER SESSION command. Once the trace file is generated you run the tkprof tool against the trace file and then look at the output from the tkprof tool. This can also be used to generate explain plan output.
8. When looking at v$sysstat you see that sorts (disk) is high. Is this bad or good? If bad -How do you correct it?
Level: Intermediate
Expected answer: If you get excessive disk sorts this is bad. This indicates you need to tune the sort area parameters in the initialization files. The major sort are parameter is the SORT_AREA_SIZe parameter.
9. When should you increase copy latches? What parameters control copy latches?
Level: high
Expected answer: When you get excessive contention for the copy latches as shown by the "redo copy" latch hit ratio. You can increase copy latches via the initialization parameter LOG_SIMULTANEOUS_COPIES to twice the number of CPUs on your system.
10. Where can you get a list of all initialization parameters for your instance? How about an indication if they are default settings or have been changed?
Level: Low
Expected answer: You can look in the init.ora file for an indication of manually set parameters. For all parameters, their value and whether or not the current value is the default value, look in the v$parameter view.
11. Describe hit ratio as it pertains to the database buffers. What is the difference between instantaneous and cumulative hit ratio and which should be used for tuning?
Level: Intermediate
Expected answer: The hit ratio is a measure of how many times the database was able to read a value from the buffers verses how many times it had to re-read a data value from the disks. A value greater than 80-90% is good, less could indicate problems. If you simply take the ratio of existing parameters this will be a cumulative value since the database started. If you do a comparison between pairs of readings based on some arbitrary time span, this is the instantaneous ratio for that time span. Generally speaking an instantaneous reading gives more valuable data since it will tell you what your instance is doing for the time it was generated over.
12. Discuss row chaining, how does it happen? How can you reduce it? How do you correct it?
Level: high
Expected answer: Row chaining occurs when a VARCHAR2 value is updated and the length of the new value is longer than the old value and won?t fit in the remaining block space. This results in the row chaining to another block. It can be reduced by setting the storage parameters on the table to appropriate values. It can be corrected by export and import of the effected table.
13. When looking at the estat events report you see that you are getting busy buffer waits. Is this bad? How can you find what is causing it?
Level: high
Expected answer: Buffer busy waits could indicate contention in redo, rollback or data blocks. You need to check the v$waitstat view to see what areas are causing the problem. The value of the "count" column tells where the problem is, the "class" column tells you with what. UNDO is rollback segments, DATA is data base buffers.
14. If you see contention for library caches how can you fix it?
Level: Intermediate
Expected answer: Increase the size of the shared pool.
15. If you see statistics that deal with "undo" what are they really talking about?
Level: Intermediate
Expected answer: Rollback segments and associated structures.
16. If a tablespace has a default pctincrease of zero what will this cause (in relationship to the smon process)?
Level: High
Expected answer: The SMON process won?t automatically coalesce its free space fragments.
17. If a tablespace shows excessive fragmentation what are some methods to defragment the tablespace? (7.1,7.2 and 7.3 only)
Level: High
Expected answer: In Oracle 7.0 to 7.2 The use of the 'alter session set events 'immediate trace name coalesce level ts#';? command is the easiest way to defragment contiguous free space fragmentation. The ts# parameter corresponds to the ts# value found in the ts$ SYS table. In version 7.3 the ?alter tablespace coalesce;? is best. If the free space isn?t contiguous then export, drop and import of the tablespace contents may be the only way to reclaim non-contiguous free space.
18. How can you tell if a tablespace has excessive fragmentation?
Level: Intermediate
If a select against the dba_free_space table shows that the count of a tablespaces extents is greater than the count of its data files, then it is fragmented.
19. You see the following on a status report:
redo log space requests 23
redo log space wait time 0
Is this something to worry about? What if redo log space wait time is high? How can you fix this?
Level: Intermediate
Expected answer: Since the wait time is zero, no. If the wait time was high it might indicate a need for more or larger redo logs.
20. What can cause a high value for recursive calls? How can this be fixed?
Level: High
Expected answer: A high value for recursive calls is cause by improper cursor usage, excessive dynamic space management actions, and or excessive statement re-parses. You need to determine the cause and correct it By either relinking applications to hold cursors, use proper space management techniques (proper storage and sizing) or ensure repeat queries are placed in packages for proper reuse.
21. If you see a pin hit ratio of less than 0.8 in the estat library cache report is this a problem? If so, how do you fix it?
Level: Intermediate
Expected answer: This indicate that the shared pool may be too small. Increase the shared pool size.
22. If you see the value for reloads is high in the estat library cache report is this a matter for concern?
Level: Intermediate
Expected answer: Yes, you should strive for zero reloads if possible. If you see excessive reloads then increase the size of the shared pool.
23. You look at the dba_rollback_segs view and see that there is a large number of shrinks and they are of relatively small size, is this a problem? How can it be fixed if it is a problem?
Level: High
Expected answer: A large number of small shrinks indicates a need to increase the size of the rollback segment extents. Ideally you should have no shrinks or a small number of large shrinks. To fix this just increase the size of the extents and adjust optimal accordingly.
24. You look at the dba_rollback_segs view and see that you have a large number of wraps is this a problem?
Level: High
Expected answer: A large number of wraps indicates that your extent size for your rollback segments are probably too small. Increase the size of your extents to reduce the number of wraps. You can look at the average transaction size in the same view to get the information on transaction size.
25. In a system with an average of 40 concurrent users you get the following from a query on rollback extents:
ROLLBACK CUR EXTENTS
--------------------- --------------------------
R01 11
R02 8
R03 12
R04 9
SYSTEM 4
You have room for each to grow by 20 more extents each. Is there a problem? Should you take any action?
Level: Intermediate
Expected answer: No there is not a problem. You have 40 extents showing and an average of 40 concurrent users. Since there is plenty of room to grow no action is needed.
26. You see multiple extents in the temporary tablespace. Is this a problem?
Level: Intermediate
Expected answer: As long as they are all the same size this isn?t a problem. In fact, it can even improve performance since Oracle won?t have to create a new extent when a user needs one.
Installation/Configuration
1. Define OFA.
Level: Low
Expected answer: OFA stands for Optimal Flexible Architecture. It is a method of placing directories and files in an Oracle system so that you get the maximum flexibility for future tuning and file placement.
2. How do you set up your tablespace on installation?
Level: Low
Expected answer: The answer here should show an understanding of separation of redo and rollback, data and indexes and isolation os SYSTEM tables from other tables. An example would be to specify that at least 7 disks should be used for an Oracle installation so that you can place SYSTEM tablespace on one, redo logs on two (mirrored redo logs) the TEMPORARY tablespace on another, ROLLBACK tablespace on another and still have two for DATA and INDEXES. They should indicate how they will handle archive logs and exports as well. As long as they have a logical plan for combining or further separation more or less disks can be specified.
3. What should be done prior to installing Oracle (for the OS and the disks)?
Level: Low
Expected Answer: adjust kernel parameters or OS tuning parameters in accordance with installation guide. Be sure enough contiguous disk space is available.
4. You have installed Oracle and you are now setting up the actual instance. You have been waiting an hour for the initialization script to finish, what should you check first to determine if there is a problem?
Level: Intermediate to high
Expected Answer: Check to make sure that the archiver isn?t stuck. If archive logging is turned on during install a large number of logs will be created. This can fill up your archive log destination causing Oracle to stop to wait for more space.
5. When configuring SQLNET on the server what files must be set up?
Level: Intermediate
Expected answer: INITIALIZATION file, TNSNAMES.ORA file, SQLNET.ORA file
6. When configuring SQLNET on the client what files need to be set up?
Level: Intermediate
Expected answer: SQLNET.ORA, TNSNAMES.ORA
7. What must be installed with ODBC on the client in order for it to work with Oracle?
Level: Intermediate
Expected answer: SQLNET and PROTOCOL (for example: TCPIP adapter) layers of the transport programs.
8. You have just started a new instance with a large SGA on a busy existing server. Performance is terrible, what should you check for?
Level: Intermediate
Expected answer: The first thing to check with a large SGA is that it isn?t being swapped out.
9. What OS user should be used for the first part of an Oracle installation (on UNIX)?
Level: low
Expected answer: You must use root first.
10. When should the default values for Oracle initialization parameters be used as is?
Level: Low
Expected answer: Never
11. How many control files should you have? Where should they be located?
Level: Low
Expected answer: At least 2 on separate disk spindles. Be sure they say on separate disks, not just file systems.
12. How many redo logs should you have and how should they be configured for maximum recoverability?
Level: Intermediate
Expected answer: You should have at least three groups of two redo logs with the two logs each on a separate disk spindle (mirrored by Oracle). The redo logs should not be on raw devices on UNIX if it can be avoided.
13. You have a simple application with no "hot" tables (i.e. uniform IO and access requirements). How many disks should you have assuming standard layout for SYSTEM, USER, TEMP and ROLLBACK tablespaces?
Expected answer: At least 7, see disk configuration answer above.
Data Modeler:
1. Describe third normal form?
Level: Low
Expected answer: Something like: In third normal form all attributes in an entity are related to the primary key and only to the primary key
2. Is the following statement true or false:
"All relational databases must be in third normal form"
Why or why not?
Level: Intermediate
Expected answer: False. While 3NF is good for logical design most databases, if they have more than just a few tables, will not perform well using full 3NF. Usually some entities will be denormalized in the logical to physical transfer process.
3. What is an ERD?
Level: Low
Expected answer: An ERD is an Entity-Relationship-Diagram. It is used to show the entities and relationships for a database logical model.
4. Why are recursive relationships bad? How do you resolve them?
Level: Intermediate
A recursive relationship (one where a table relates to itself) is bad when it is a hard relationship (i.e. neither side is a "may" both are "must") as this can result in it not being possible to put in a top or perhaps a bottom of the table (for example in the EMPLOYEE table you couldn?t put in the PRESIDENT of the company because he has no boss, or the junior janitor because he has no subordinates). These type of relationships are usually resolved by adding a small intersection entity.
5. What does a hard one-to-one relationship mean (one where the relationship on both ends is "must")?
Level: Low to intermediate
Expected answer: This means the two entities should probably be made into one entity.
6. How should a many-to-many relationship be handled?
Level: Intermediate
Expected answer: By adding an intersection entity table
7. What is an artificial (derived) primary key? When should an artificial (or derived) primary key be used?
Level: Intermediate
Expected answer: A derived key comes from a sequence. Usually it is used when a concatenated key becomes too cumbersome to use as a foreign key.
8. When should you consider denormalization?
Level: Intermediate
Expected answer: Whenever performance analysis indicates it would be beneficial to do so without compromising data integrity.
UNIX:
1. How can you determine the space left in a file system?
Level: Low
Expected answer: There are several commands to do this: du, df, or bdf
2. How can you determine the number of SQLNET users logged in to the UNIX system?
Level: Intermediate
Expected answer: SQLNET users will show up with a process unique name that begins with oracle, if you do a ps -ef|grep oracle|wc -l you can get a count of the number of users.
3. What command is used to type files to the screen?
Level: Low
Expected answer: cat, more, pg
4. What command is used to remove a file?
Level: Low
Expected answer: rm
5. Can you remove an open file under UNIX?
Level: Low
Expected answer: yes
6. How do you create a decision tree in a shell script?
Level: intermediate
Expected answer: depending on shell, usually a case-esac or an if-endif or fi structure
7. What is the purpose of the grep command?
Level: Low
Expected answer: grep is a string search command that parses the specified string from the specified file or files
8. The system has a program that always includes the word nocomp in its name, how can you determine the number of processes that are using this program?
Level: intermediate
Expected answer: ps -ef|grep *nocomp*|wc -l
9. What is an inode?
Level: Intermediate
Expected answer: an inode is a file status indicator. It is stored in both disk and memory and tracts file status. There is one inode for each file on the system.
10. The system administrator tells you that the system hasn?t been rebooted in 6 months, should he be proud of this?
Level: High
Expected answer: Maybe. Some UNIX systems don?t clean up well after themselves. Inode problems and dead user processes can accumulate causing possible performance and corruption problems. Most UNIX systems should have a scheduled periodic reboot so file systems can be checked and cleaned and dead or zombie processes cleared out.
11. What is redirection and how is it used?
Level: Intermediate
Expected answer: redirection is the process by which input or output to or from a process is redirected to another process. This can be done using the pipe symbol "|", the greater than symbol ">" or the "tee" command. This is one of the strengths of UNIX allowing the output from one command to be redirected directly into the input of another command.
12. How can you find dead processes?
Level: Intermediate
Expected answer: ps -ef|grep zombie -- or -- who -d depending on the system.
13. How can you find all the processes on your system?
Level: Low
Expected answer: Use the ps command
14. How can you find your id on a system?
Level: Low
Expected answer: Use the "who am i" command.
15. What is the finger command?
Level: Low
Expected answer: The finger command uses data in the passwd file to give information on system users.
16. What is the easiest method to create a file on UNIX?
Level: Low
Expected answer: Use the touch command
17. What does >> do?
Level: Intermediate
Expected answer: The ">>" redirection symbol appends the output from the command specified into the file specified. The file must already have been created.
18. If you aren?t sure what command does a particular UNIX function what is the best way to determine the command?
Expected answer: The UNIX man -k command will search the man pages for the value specified. Review the results from the command to find the command of interest.
Oracle Troubleshooting:
1. How can you determine if an Oracle instance is up from the operating system level?
Level: Low
Expected answer: There are several base Oracle processes that will be running on multi-user operating systems, these will be smon, pmon, dbwr and lgwr. Any answer that has them using their operating system process showing feature to check for these is acceptable. For example, on UNIX a ps -ef|grep dbwr will show what instances are up.
2. Users from the PC clients are getting messages indicating :
Level: Low
ORA-06114: (Cnct err, can't get err txt. See Servr Msgs & Codes Manual)
What could the problem be?
Expected answer: The instance name is probably incorrect in their connection string.
3. Users from the PC clients are getting the following error stack:
Level: Low
ERROR: ORA-01034: ORACLE not available
ORA-07318: smsget: open error when opening sgadef.dbf file.
HP-UX Error: 2: No such file or directory
What is the probable cause?
Expected answer: The Oracle instance is shutdown that they are trying to access, restart the instance.
4. How can you determine if the SQLNET process is running for SQLNET V1? How about V2?
Level: Low
Expected answer: For SQLNET V1 check for the existence of the orasrv process. You can use the command "tcpctl status" to get a full status of the V1 TCPIP server, other protocols have similar command formats. For SQLNET V2 check for the presence of the LISTENER process(s) or you can issue the command "lsnrctl status".
5. What file will give you Oracle instance status information? Where is it located?
Level: Low
Expected answer: The alert.ora log. It is located in the directory specified by the background_dump_dest parameter in the v$parameter table.
6. Users aren?t being allowed on the system. The following message is received:
Level: Intermediate
ORA-00257 archiver is stuck. Connect internal only, until freed
What is the problem?
Expected answer: The archive destination is probably full, backup the archive logs and remove them and the archiver will re-start.
7. Where would you look to find out if a redo log was corrupted assuming you are using Oracle mirrored redo logs?
Level: Intermediate
Expected answer: There is no message that comes to the SQLDBA or SRVMGR programs during startup in this situation, you must check the alert.log file for this information.
8. You attempt to add a datafile and get:
Level: Intermediate
ORA-01118: cannot add anymore datafiles: limit of 40 exceeded
What is the problem and how can you fix it?
Expected answer: When the database was created the db_files parameter in the initialization file was set to 40. You can shutdown and reset this to a higher value, up to the value of MAX_DATAFILES as specified at database creation. If the MAX_DATAFILES is set to low, you will have to rebuild the control file to increase it before proceeding.
9. You look at your fragmentation report and see that smon hasn?t coalesced any of you tablespaces, even though you know several have large chunks of contiguous free extents. What is the problem?
Level: High
Expected answer: Check the dba_tablespaces view for the value of pct_increase for the tablespaces. If pct_increase is zero, smon will not coalesce their free space.
10. Your users get the following error:
Level: Intermediate
ORA-00055 maximum number of DML locks exceeded
What is the problem and how do you fix it?
Expected answer: The number of DML Locks is set by the initialization parameter DML_LOCKS. If this value is set to low (which it is by default) you will get this error. Increase the value of DML_LOCKS. If you are sure that this is just a temporary problem, you can have them wait and then try again later and the error should clear.
11. You get a call from you backup DBA while you are on vacation. He has corrupted all of the control files while playing with the ALTER DATABASE BACKUP CONTROLFILE command. What do you do?
Level: High
Expected answer: As long as all datafiles are safe and he was successful with the BACKUP controlfile command you can do the following:
CONNECT INTERNAL
STARTUP MOUNT
(Take any read-only tablespaces offline before next step ALTER DATABASE DATAFILE .... OFFLINE;)
RECOVER DATABASE USING BACKUP CONTROLFILE
ALTER DATABASE OPEN RESETLOGS;
(bring read-only tablespaces back online)
Shutdown and backup the system, then restart
If they have a recent output file from the ALTER DATABASE BACKUP CONTROL FILE TO TRACE; command, they can use that to recover as well.
If no backup of the control file is available then the following will be required:
CONNECT INTERNAL
STARTUP NOMOUNT
CREATE CONTROL FILE .....;
However, they will need to know all of the datafiles, logfiles, and settings for MAXLOGFILES, MAXLOGMEMBERS, MAXLOGHISTORY, MAXDATAFILES for the database to use the command.

1. Which of the following statements is true about implicit cursors?
1. Implicit cursors are used for SQL statements that are not named.
2. Developers should use implicit cursors with great care.
3. Implicit cursors are used in cursor for loops to handle data processing.
4. Implicit cursors are no longer a feature in Oracle.
2. Which of the following is not a feature of a cursor FOR loop?
1. Record type declaration.
2. Opening and parsing of SQL statements.
3. Fetches records from cursor.
4. Requires exit condition to be defined.
3. A developer would like to use referential datatype declaration on a variable. The variable name is EMPLOYEE_LASTNAME, and the corresponding table and column is EMPLOYEE, and LNAME, respectively. How would the developer define this variable using referential datatypes?
1. Use employee.lname%type.
2. Use employee.lname%rowtype.
3. Look up datatype for EMPLOYEE column on LASTNAME table and use that.
4. Declare it to be type LONG.
4. Which three of the following are implicit cursor attributes?
1. %found
2. %too_many_rows
3. %notfound
4. %rowcount
5. %rowtype
5. If left out, which of the following would cause an infinite loop to occur in a simple loop?
1. LOOP
2. END LOOP
3. IF-THEN
4. EXIT
6. Which line in the following statement will produce an error?
1. cursor action_cursor is
2. select name, rate, action
3. into action_record
4. from action_table;
5. There are no errors in this statement.
7. The command used to open a CURSOR FOR loop is
1. open
2. fetch
3. parse
4. None, cursor for loops handle cursor opening implicitly.
8. What happens when rows are found using a FETCH statement
1. It causes the cursor to close
2. It causes the cursor to open
3. It loads the current row values into variables
4. It creates the variables to hold the current row values
9. Read the following code:

10.  CREATE OR REPLACE PROCEDURE find_cpt

11.  (v_movie_id {Argument Mode} NUMBER, v_cost_per_ticket {argument mode} NUMBER)

12.  IS

13.  BEGIN

14.    IF v_cost_per_ticket  > 8.5 THEN

15.  SELECT  cost_per_ticket

16.  INTO            v_cost_per_ticket

17.  FROM            gross_receipt

18.  WHERE   movie_id = v_movie_id;

19.    END IF;

20.  END;

Which mode should be used for V_COST_PER_TICKET?

1. IN
2. OUT
3. RETURN
4. IN OUT
20. Read the following code:

22.  CREATE OR REPLACE TRIGGER update_show_gross

23.        {trigger information}

24.       BEGIN

25.        {additional code}

26.       END;

The trigger code should only execute when the column, COST_PER_TICKET, is greater than $3. Which trigger information will you add?

1. WHEN (new.cost_per_ticket > 3.75)
2. WHEN (:new.cost_per_ticket > 3.75
3. WHERE (new.cost_per_ticket > 3.75)
4. WHERE (:new.cost_per_ticket > 3.75)
26. What is the maximum number of handlers processed before the PL/SQL block is exited when an exception occurs?
1. Only one
2. All that apply
3. All referenced
4. None
27. For which trigger timing can you reference the NEW and OLD qualifiers?
1. Statement and Row
2. Statement only
3. Row only
4. Oracle Forms trigger
28. Read the following code:

30.  CREATE OR REPLACE FUNCTION get_budget(v_studio_id IN NUMBER)

RETURN number IS

v_yearly_budget NUMBER;

BEGIN

       SELECT  yearly_budget

       INTO            v_yearly_budget

       FROM            studio

       WHERE   id = v_studio_id;

       RETURN v_yearly_budget;

END;

Which set of statements will successfully invoke this function within SQL*Plus?

1. VARIABLE g_yearly_budget NUMBER
   EXECUTE g_yearly_budget := GET_BUDGET(11);
2. VARIABLE g_yearly_budget NUMBER
   EXECUTE :g_yearly_budget := GET_BUDGET(11);
3. VARIABLE :g_yearly_budget NUMBER
   EXECUTE :g_yearly_budget := GET_BUDGET(11);
4. VARIABLE g_yearly_budget NUMBER
   :g_yearly_budget := GET_BUDGET(11);

31.  CREATE OR REPLACE PROCEDURE update_theater

32.  (v_name IN VARCHAR v_theater_id IN NUMBER) IS

33.  BEGIN

34.         UPDATE  theater

35.         SET             name = v_name

36.         WHERE   id = v_theater_id;

37.  END update_theater;

38.            

When invoking this procedure, you encounter the error:

ORA-000: Unique constraint(SCOTT.THEATER_NAME_UK) violated.

How should you modify the function to handle this error?

1. An user defined exception must be declared and associated with the error code and handled in the EXCEPTION section.
2. Handle the error in EXCEPTION section by referencing the error code directly.
3. Handle the error in the EXCEPTION section by referencing the UNIQUE_ERROR predefined exception.
4. Check for success by checking the value of SQL%FOUND immediately after the UPDATE statement.
38. Read the following code:

40.  CREATE OR REPLACE PROCEDURE calculate_budget IS

41.  v_budget        studio.yearly_budget%TYPE;

42.  BEGIN

43.         v_budget := get_budget(11);

44.         IF v_budget < 30000

45.                     THEN

46.                 set_budget(11,30000000);

47.         END IF;

48.  END;

You are about to add an argument to CALCULATE_BUDGET. What effect will this have?

1. The GET_BUDGET function will be marked invalid and must be recompiled before the next execution.
2. The SET_BUDGET function will be marked invalid and must be recompiled before the next execution.
3. Only the CALCULATE_BUDGET procedure needs to be recompiled.
4. All three procedures are marked invalid and must be recompiled.
48. Which procedure can be used to create a customized error message?
1. RAISE_ERROR
2. SQLERRM
3. RAISE_APPLICATION_ERROR
4. RAISE_SERVER_ERROR
49. The CHECK_THEATER trigger of the THEATER table has been disabled. Which command can you issue to enable this trigger?
1. ALTER TRIGGER check_theater ENABLE;
2. ENABLE TRIGGER check_theater;
3. ALTER TABLE check_theater ENABLE check_theater;
4. ENABLE check_theater;
50. Examine this database trigger

52.  CREATE OR REPLACE TRIGGER prevent_gross_modification

53.  {additional trigger information}

54.  BEGIN

55.         IF TO_CHAR(sysdate, DY) = MON

56.     THEN

57.     RAISE_APPLICATION_ERROR(-20000,Gross receipts cannot be deleted on Monday);

58.         END IF;

59.  END;

This trigger must fire before each DELETE of the GROSS_RECEIPT table. It should fire only once for the entire DELETE statement. What additional information must you add?

1. BEFORE DELETE ON gross_receipt
2. AFTER DELETE ON gross_receipt
3. BEFORE (gross_receipt DELETE)
4. FOR EACH ROW DELETED FROM gross_receipt
59. Examine this function:

61.  CREATE OR REPLACE FUNCTION set_budget

62.  (v_studio_id IN NUMBER, v_new_budget IN NUMBER) IS

63.  BEGIN

64.         UPDATE  studio

65.         SET             yearly_budget = v_new_budget

       WHERE   id = v_studio_id;

       IF SQL%FOUND THEN

               RETURN TRUEl;

       ELSE

               RETURN FALSE;

       END IF;

       COMMIT;

END;

Which code must be added to successfully compile this function?

1. Add RETURN right before the IS keyword.
2. Add RETURN number right before the IS keyword.
3. Add RETURN boolean right after the IS keyword.
4. Add RETURN boolean right before the IS keyword.
65. Under which circumstance must you recompile the package body after recompiling the package specification?
1. Altering the argument list of one of the package constructs
2. Any change made to one of the package constructs
3. Any SQL statement change made to one of the package constructs
4. Removing a local variable from the DECLARE section of one of the package constructs
66. Procedure and Functions are explicitly executed. This is different from a database trigger. When is a database trigger executed?
1. When the transaction is committed
2. During the data manipulation statement
3. When an Oracle supplied package references the trigger
4. During a data manipulation statement and when the transaction is committed
67. Which Oracle supplied package can you use to output values and messages from database triggers, stored procedures and functions within SQL*Plus?
1. DBMS_DISPLAY
2. DBMS_OUTPUT
3. DBMS_LIST
4. DBMS_DESCRIBE
68. What occurs if a procedure or function terminates with failure without being handled?
1. Any DML statements issued by the construct are still pending and can be committed or rolled back.
2. Any DML statements issued by the construct are committed
3. Unless a GOTO statement is used to continue processing within the BEGIN section, the construct terminates.
4. The construct rolls back any DML statements issued and returns the unhandled exception to the calling environment.
69. Examine this code

71.  BEGIN

72.         theater_pck.v_total_seats_sold_overall := theater_pck.get_total_for_year;

73.  END;

For this code to be successful, what must be true?

1. Both the V_TOTAL_SEATS_SOLD_OVERALL variable and the GET_TOTAL_FOR_YEAR function must exist only in the body of the THEATER_PCK package.
2. Only the GET_TOTAL_FOR_YEAR variable must exist in the specification of the THEATER_PCK package.
3. Only the V_TOTAL_SEATS_SOLD_OVERALL variable must exist in the specification of the THEATER_PCK package.
4. Both the V_TOTAL_SEATS_SOLD_OVERALL variable and the GET_TOTAL_FOR_YEAR function must exist in the specification of the THEATER_PCK package.
73. A stored function must return a value based on conditions that are determined at runtime. Therefore, the SELECT statement cannot be hard-coded and must be created dynamically when the function is executed. Which Oracle supplied package will enable this feature?
1. DBMS_DDL
2. DBMS_DML
3. DBMS_SYN
4. DBMS_SQL